Jobs Portal Online

It’s a tough question to answer, and one I hear all the time: Which paper stock should I choose for my book? And although it’s a tough question, it is an important one because the paper you choose will tell your potential buyer what kind of book this is. Go too cheap, you might lose some buyers to a different title. Go too expensive, you just wasted your money.

Book paper weights are different than the paper weight measurements you will see in an office supply store. A 20# bond that you would find at Staples is similar to a 50# offset at a book printer. A 24# bond is similar to 60# offset, 28# is similar to 70# offset, etc.

Most black & white books with no photos are printed on either 50# or 60# offset. Going with 50# is adequate for most books and will save you some money. However, if you want your book to have a nicer feel to it, check out the extra cost for 60#. It might be worth it to you.

One thing I cannot emphasize enough - get print samples. There are a couple times when I have had a client tell me they knew exactly what type of paper they wanted to use, but then they were disappointed when they got the final product. Why? A friend of theirs had told them which paper stock to choose, and they ordered their books without ever seeing a paper sample. Don’t make the same mistake!

Now let’s assume your book is not as simple as a novel or a book with just black text. Maybe your book needs to be printed in full color. If that’s the case, you’ll want to use a paper stock that highlights the color better than a typical offset sheet. Glossy paper will usually do the trick.

Also, if you are printing in full color, you’ll definitely want a thicker paper stock. You don’t want any see-through for your color images from one side of the page to another. I usually recommend 80# gloss for most color books. If you want a little thicker, step up to 100# gloss. If you are trying to save cost, drop down to 70# gloss - but never less than that.

I can’t say it often enough: No matter which paper stock you think you want, ask your printer for some samples first.

When it comes to cover stock, for a paperback book a 10 pt. C1S cover is standard. However, it is usually very inexpensive to upgrade to a 12 pt. C1S cover. People do judge a book by its cover, so this might be a cost-effective upgrade.